07 4152 2111

PLATE XTREME ENFORCER

Sea Jay Boats

ADDITIONAL INFO

PLATE XTREME ENFORCER

The 4.8 Enforcer the smallest member of our Plate range is a Side Console, with open 25 inch transom, keeping you well above the water line and well suited to many applications.

Classed as a real all-rounder, giving a soft ride in choppy water conditions, and suited to estuary fishing, crabbing , prawning, and it the weather is favourable a short trip to the reef is not out of the question.

Boasting a large deck and platform area, there is loads of room for all fishing and boating needs, with room behind the console specially designed to fit your regular round collapsible crab pots.

ENFORCER BOAT PACKAGES
MAKE AN ENQUIRY

This model has been proven to be a real all-rounder as it is really suited to specific boating needs especially in an area that can be prone to choppy water conditions.

Download Enforcer Flyer
  • SPECS
  • FEATURES
  • GALLERY
  •   4.8
    3D designed & CNC cut within factory •
    bottoms (mm) 4.0
    sides (mm) 4.0
    transom (mm) 4.0
    longitudinal bulkheads (mm) 3.0
    bulkheads (mm) 4.0
    keel – solid (mm) 4.0
    beam (m) 2.2
    hull length (m) 4.82
    overall length (m) 4.95
    dead rise (deg) (at transom) 16
    depth (m) 1.09
    depth (m) – including console & rail 1.49
    overall height on trailer (m) 1.96
    length on trailer engine down 6.41
    no. of persons (at 80kg per person) 5
    weight approximate – hull only (kg) 470
    weight approximate – boat (dry) / motor / trailer (kg) 1030
    rec hp 70
    max hp 80
    max motor weight (kg) 175
  •   4.8
    anchorwell •
    capped keel •
    flow through alloy bait tank •
    anchor storage box in rear star corner •
    bollards – 1 x front •
    bow sprit & roller •
    bungs – alloy 38mm x 2 •
    side console – with shelf and storage compartment •
    front casting platform •
    weather proof front storage hatch •
    floor – 3mm alloy fully welded wash down deck •
    flotation – foam / air chamber •
    sump box with bilge pump & drain •
    reverse chine hull •
    side pockets (long) x 2 •
    spray deflector strake •
    towing eye (double) – heavy duty •
    transducer brackets x 2 •
    rear steps & rails x 2 •
    wide side decks •
    STANDARD FITOUT INCLUSIONS
    carpeted floor •
    console windscreen •
    rod holders on front of console •
    flow-rite qwik-lok hose connections •
    gunwhale rubber insert •
    inspection port x 2 (in cockpit floor) •
    standard pin stripping •
    rod holders (alloy) x 6 – in wide side decks •
    ELECTRICAL
    accessory pre rig loom •
    battery box (medium) x 1 •
    battery master / isolation switch BEP •
    automatic bilge pump for sump box •
    bilge pump •
    light (LED) – anchor/stern •
    light (LED) – navigation •
    power socket 12v •
    switch panel BEP (6 gang) x 1 •
    FUEL TANK
    under floor / floor fill 80ltr
    fuel hose cover •
    separate fuel cell (tank within it’s own cavity) •
    RAILS
    bow – low profile (25mm) •
    console •
    transom (25mm) •
    SEATS
    2 x pedestals with part upholstered seats, 6 x sockets •
    STEERING
    hydraulic steering – Baystar •
    sports steering wheel •
    TRANSOM
    25″ •
    transom tie down points •
    FACTORY OPTIONS
    rear cast platform opt
    tiller steer (max hp 70) opt
    boarding ladder – heavy duty opt
    painted inside & out (2 pac commercial marine grade) opt
    deck wash 19ltr / min (saltwater) opt
    custom options available – please contact factory opt
Navigation